Spear & Jackson / Hedge & Topiary Shears
Spear & Jackson 8110RS Notched Hedge Shears
C50 carbon-steel blades with a stem notch pair with aluminum handles for a fixed hedge-shear layout.
CHOOSING THIS MODEL
Choose a notch in a fixed body
The notch is the useful profile difference in these Razorsharp shears. The listing describes it for thicker stems alongside the main hedge-trimming blades, without giving a separate notch diameter. That gives a real comparison with waved blades or a geared mechanism, but it is not permission to cut every branch that enters the notch.
The full description identifies hardened and tempered C50 carbon steel with chrome plating. Aluminum handles carry non-slip grips. The listed overall body is about 23.43 by 8.86 inches and the item mass about 2.1 lb; these are body/carrying figures rather than a working opening.
Compare Kimura 202 Pro for a geared telescopic model whose notch has an explicit seller 25 mm limit. Compare Tabor B212A for waved blades and a tension-adjustment bolt. Blade-size labels in this listing vary between 230 and 236 mm, with another 225 mm field, so confirm the actual blade measurement if an exact size determines your choice.
MODEL DETAILS
Specifications & included parts
| Detail | Product details |
|---|---|
| Cutting action | Manual hedge shearing with stem notch |
| Blade material | Hardened/tempered C50 carbon steel with chrome plating |
| Body / handles | Aluminum handles with non-slip grips |
| Distinct blade feature | Notch described for thicker stems; no separate diameter stated |
| Listed overall size | About 23.43 × 8.86 in |
| Listed item mass | About 2.1 lb |
| Model / part | 8110RS / 8110RS/09 |
| Contents | One pair of hedge shears |
Check the selected size, working profile and supplied parts on Amazon before ordering.
Where this model is useful
- The notch is a specifically named contact feature.
- C50 steel, chrome plating and aluminum handles are directly described.
Trade-offs to check
- No numeric notch/branch capacity is given.
- Blade-size entries are not consistent enough for one exact working length.
What to check before choosing
Confirm notch scope
Match the intended stem to the exact instructions instead of using overall or blade length as capacity.
Your questions about this product
What is the notch for?
The listing describes it for thicker stems, but does not give its own maximum diameter.
What material is under the plating?
The full description names hardened and tempered C50 carbon steel; chrome is the surface treatment.
What should I compare for a stated notch diameter?
Kimura 202 Pro explicitly names a notch for stems up to 25 mm, subject to that exact tool’s conditions.
Other options to consider
About this product information
Independent buying guidance based on the selected Amazon listing and the additional model references below. We have not conducted a hands-on test; confirm the current variant, supplied parts and any unresolved specification before ordering.
Selected Amazon listing ↗ · Listing checked 2026-11-06 · Information reviewed 2026-11-06
Confirm the current variation and supplied parts on Amazon before ordering.
